Aquaterres: the definitive solution for static electricity

It is a device for removing induced currents. These are created by the water or the various electrical devices used for the maintenance of the swimming pool.

Category:

It is a device for removing induced currents. These are created by the water or the various electrical devices used for the maintenance of the swimming pool. The pump, pH regulator, electrolyser, robot, etc. they are therefore concerned.

By putting the water in the swimming pool at the same potential as the ground near the swimming pool, this assembly makes it possible to fight against the phenomenon of static electricity.

It does not replace the “grounding for electrical safety” of various electrical devices (pump, etc.).

The latter is a necessity, the two earth electrodes must not be connected to each other.

Aquaterre is used to eliminate “parasitic” currents

In your swimming pool, the presence of these electric charges, if they are not evacuated, can be at the origin of the concentration of metal ions. These can cause degradation of the surface of the pool liner.

They can also be at the origin of the creation of precipitates in the form of deposits of different colors (spots) or the appearance of a bubbling micro Gelcoat for fibers, plastic swimming pools …

Aquaterre is therefore used to combat stains and other undesirable phenomena due to the build-up of static electricity.

If it is equipped with a group, the water tank is essential to avoid the appearance of long-term osmosis problems.