The system allows changing the advertising posters suspended in the corridors of the sales spaces, without any accessory other than a simple remote control.
The height adjustment of the panel is achieved by considering the lower part of the poster, whatever its size. It must be defined before the appliance is installed.
Simple installation: Two screws and a 230V line enough to start it up.
With a very low cost, this innovative system requires no maintenance, is based on known products and proven reliability.
The motor will pull the panels up and down by means of a pulley. The assembly is piloted with a remote control. An integrated electronic card controls the speed and position of the panels, following the established program. With the help of the control, the operator lowers the panel, and once changed, a simple support on the control will restore the panels to the original height, and you can go to the next panel.
The bottom of the panel will always be the reference, that is, if the size of the poster changes, it will rise to the programmed height automatically.
Any operator can use the BIPPUB (no qualification is required) It eliminates the use of scaffolding or ladders, but above all it does not require two people.
Reduces the risks of accidents.
Suppresses maintenance of elevators, scaffolding, etc.
It allows you to change the posters at any time, (Even in times of great influx of customers.) Therefore, more frequently.
It allows several operators to work at the same time, saving a lot of time.
Poster changes can be made during the workers’ normal working hours.
Saves significant time on changing posters.
Motor Torque : 3 Nm
Speed : About 0.5 meters / second with 500g weight
Cable resistance : Standard 40kg
Length of cables : Minimum 12 meters Maximum 30 meters (for cable of 10Kg)
Position control : with digital encoder
power : 230 Volts AC or 24 volts , if order
Consumation. 1.5 A on moving 50 mA sto
Generales dimensuions Width 100; Height 135; Length 230 mm