For the motorization of parasols, we have conceived a simple, efficient, economical and discreet system. The motor is located inside the mast and an electronic card manages the opening and closing movements.
The system is piloted by remote control, smartphone or key or button control on the mast. In the event of a power failure or outage, the engine has an alternative manual operating system.
Very simple movement controlled by using 2 buttons on the remote control or on the phone, one to open and one to close.
You can generate the movements of the parasols, either individually or by group of parasols.
An emergency button or key can be provided
Detection of current consumption protects the system in case of malfunction.
An additional contact allows to control the illumination lamps of the umbrella.
The only restriction is that the motor needs a 117mm square space. Therefore, it is necessary that the base of your parasol faces at least 117 mm inside. Adaptation systems are planned.
The motor is supported on a plate attached to the pole.
The transmission with your endless will be done with a coupling and clamping piece, it can be the link between your current tube and the new base of the umbrella.
The concept includes:
– 220 volts 50 Nm motor
– Rotation speed 110 rpm
– Electronical PCB control
– Radio receiver and transmitter
– Fitting rings motor at the tube
– Manual drive system
– Remote control 4 keys or 12 additional keys
– Bluetooth receiver
– Receiver to turn on the lamp