100% waterproof motor for underwater reel, with digital encoder.
Our encoder system is not a magnetic system so it will not be disturbed by the motor’s magnetic field. This encoder links 3000 minimum pulses per minute, providing unmatched precision.
This engine has the particularity of maintaining the roller tube directly on the holding part to the wall bracket. The engine has no other effort than the translation. This concept avoids any twisting between the engine and the engine suport, which could create a loss of tightness.
Controlled by the electronic ” TBT1033VU ”, the movements are with idle at start, (Programmable of 10, 20 or 30 ”), which allows a good position of the cover, then the engine accelerates to its maximum speed during movement, to slow down for the 5 ” end of movement.
At the opening start, the electronics check that the fasteners have been released.
1) 24 volts DC power supply.
2) Position control by digital encoder.
3) Start and stop idling in opening and closing.
4) Electrolysis contact.
5) Fastener safety.
6) Permanent control of the power.
7) Integrated HF receiver
8) Programed by remote control
We offer 2 engine torques
Engine 200 N / m at 5 rpm
Engine 300 N / m at 4 rpm
Single motor diameter of 120 mm,
Of traditional design they are reliable, fast, and powerful.
APPLIANCES IN OPTION
Training rings adjusted to your winding tubes.
Custom pole support axis.
Classic remote control.
French standard remote control.
Wifi receiver for IOS or Android